offlinefirst.blogg.se

1. Setup usb drive to boot dmg how to#
2. Setup usb drive to boot dmg mac os#
3. Setup usb drive to boot dmg plus#
4. Setup usb drive to boot dmg mac#

Recall the name of your formatted external drive when entering the following text into Terminal.Scroll down and double click on Terminal. You'll also need to ensure that macOS Big Sur is in your Applications folder, and you'll need to know the name of the external drive.

Setup usb drive to boot dmg mac#

Important: You will need to use an administrator account on your Mac to run the Terminal commands to create a boot drive.

Setup usb drive to boot dmg how to#

How to put macOS Big Sur onto your external drive Your thumb drive or external hard drive is now ready.

Setup usb drive to boot dmg mac os#

Select Mac OS Extended from the format list.If you have more than one external drive with the same name, you will need to rename the drive you are using as a bootable installer now. Note the name of your external hard drive (probably "Untitled") because you will need it when you create a bootable drive.Select your thumb drive or external drive under External.Ĭlick on the Erase tab at the top of the window.Scroll down and double-click on Disk Utility. Scroll down and double-click on Utilities.Select Applications from the list on the left side of the window. Click on Finder in your Dock to open a Finder window.Plug the thumb drive or cable for your hard drive into the appropriate port on your Mac.You'll need to start with a clean thumb drive or external hard drive to make it a bootable drive.

Setup usb drive to boot dmg plus#

Will require SSDT-AWAC.aml and SSDT-RHUB.amlįor Coffee Lake Plus and Comet Lake and Ice Lake extra aml files are required that are attached, don't forget to add them to your config.How to format your external drive for macOS Big Sur MacBookPro16,1, or MacBookPro16,3, or MacBookPro16,4 Will require SSDT-AWAC.aml and SSDT-PMC.aml (don't use SSDT-PMC on Comet Lake)Įnable-dpcd-max-link-rate-fix -> 01000000Įnable-max-pixel-clock-override -> 01000000 HD 6000 -> MacBookAir7,1 or MacBookAir7,2įor UHD620 users (Kaby Lake-R), you'll need a device-id spoof:ĪAPL,ig-platform-id -> 0900A53E (for UHD630)ĪAPL,ig-platform-id -> 00009B3E (for UHD620) Once you have reached the macOS desktop, you will need to mount your EFI partition to then copy over your EFI folder from your USB disk. Leave the USB plugged in as you will need to reboot from this a few times while macOS is installing Then you want to erase the drive and start the installation Once you have reached the installer, choose Disk Utility and then click on view and then show all devices

It may look like it has frozen in some places, but boot from USB can be slow, so please be patient. Now, boot with your USB stick, the ist has verbose enabled so you can see what is going on. Your hack will not boot with CFG-Lock enabled)

Thunderbolt(For initial install, as Thunderbolt can cause issues if not setup correctly)ĬFG Lock (MSR 0圎2 write protection)(This must be off, if you can't find the option then enable AppleXcpmCfgLock under Kernel -> Quirks. VT-d (can be enabled if you set DisableIoMapper to YES) You will want to make some changes here, if you can change these options: Once you have made those changes, save your ist and reboot your machine into your BIOS. This is currently set to MacBookPro13,1 which is for a Skylake laptop, read post 2 for configurations Then scroll further down until you find SystemProductName. (Making sure you have the correct kext in your kexts folder) Building a CustoMac Hackintosh: Buyer's Guide